How to connect your Xbox 360 controller to a PC - WBRC FOX6 News - Birmingham, AL

How to connect your Xbox 360 controller to a PC

By Gabe Gurwin


Content Provided by  

These days, you can use just about any gaming controller on your computer. Even older controllers (like the one that came with your Xbox 360 and is now gathering dust) are compatible, so long as you’ve got the relevant hardware and a few minutes to spare. Learning how to connect an Xbox 360 controller to a PC might sound intimidating, but the process is actually pretty simple.

Whether you’ve got a wireless or wired controller, functionality is identical — though many players insist that a wired controller is a must, since there’s basically no input lag. Either way, we’ve got you covered below.

Plug in your wireless receiver

This section only applies to those with wireless controllers. If you’ve got a wired Xbox 360 controller, skip straight toInstall software.

For those of you that own wireless Xbox 360 controllers, connecting to a PC isn’t as straight forward as simply plugging the device in. First off, you’ll need to purchase a capable receiver, then run the proper setup wizard.

how to connect your xbox 360 controller a pc wireless receiver

If you don’t already have a receiver, they typically cost between $10 and $20. The official Microsoft version will cost a bit more than that, but there are many third-party versions available that work perfectly well.

After purchasing the wireless receiver, connect it to a compatible USB port on your computer (see Figure A below). Once plugged in, a green light will appear on the receiver indicating the device is working properly.

Install software

For the wireless gaming receiver and the wireless Xbox 360 controller to properly sync with one another, users must download the necessary software via Microsoft’s website, or the bundled installation disc packaged with their receiver.

If you have the aforementioned installation CD (probably not, but it’s possible), insert it into your PC’s main optical drive and follow the on-screen wizard. You may need to restart your computer. If not, you can download from theXbox 360 Wireless Controller for Windowslink; if wired, select Xbox 360 Controller for Windows instead. Choose which version of Microsoft Windows you’re using — the Windows 7 drivers will work for Windows 8 and Windows 10 — select the operating system language, and clickDownload.

Once the download screen pops up, hitRunand allow the Xbox 360 Accessories Setup program to install the required files. Again, you may be required to restart your computer upon completion of the install.

how to connect your xbox 360 controller a pc sync guide

Syncing the controller

If you’re using a wired controller, just plug it in. You’re good to go. Scroll down toTesting the Controller to make sure everything is working correctly.

If not, you’ll need to connect the wireless Xbox 360 controller with the receiver plugged into your computer. To do so, first turn on the controller by holding down the Xbox Guide button in the center of the controller, and wait for the green backlight to turn on. Afterward, press the connect button on top of the wireless receiver (figure B) until it begins to flash green, then press the corresponding button on your controller (figure C).

The pairing process should only take a few seconds, after which the light on the receiver will return to solid green and one of the four corners around the controller’s Guide button will light up (figure D). If you’re still having issues, check Microsoft’s support page for more help.

Testing the controller

Once the necessary software is installed and the controller plugged in or synced, it’s time to test the connection. Open the Startmenu on your PC, click the search menu, and look for “game controllers.” You should see an option that says “Set up USB game controllers.”

how to connect your xbox 360 controller a pc test

Now, press the controller’s buttons, pull the triggers, and move the joysticks to ensure the controller is functioning properly. If it is, you’ll see the correlating action highlighted in the application. Don’t worry about which area is lighting up — as long as the system recognizes each button, you’re good. If the application does not recognize the controller, you can troubleshoot viaXbox’s support website.

Start playing

That’s all you have to do. The Xbox 360 controller is the typical default configuration for modern PC games, so you shouldn’t have to do any special key bindings or settings tweaks in the vast majority of titles. Just make sure the controller is connected when you load the game and it should be detected. In fact, some games can switch to the 360 controller automatically, even in the middle of gameplay.


  helps readers keep tabs on the fast-paced world of tech with all the latest news, fun product reviews, insightful editorials, and one-of-a-kind sneak peeks.

Powered by Frankly